Electrical Panels

APFC/RTFPC Panel mainly used for the improvement of PF up to 0.999 or Unity. Everybody knows that how much costly electrical bills. The main impact of APFC Panels for save up to 30% energy & provide quality of power to the LT Panels. APFC Panel (एपीएफसी पैनल) manufacturer mostly known as automatic power factor control panel. APFC Panel includes a microcontroller-based programmable controller which switches on or off the capacitor banks of suitable capacity. By reading the reactive load automatically in multiple stages by directly works in the principle of VAR sensing tends to maintain the PF to 0.99 Lag.

Solar ACDB (Ac distribution board) is an important part of the SPV system for Solar power Plant. Accu-panels is CPRI approved acdb dcdb manufacturer in India.

AC-DB comes with the package of protection devices such as surge protection device (SPD), MCCB/fuse/isolator/MCB. Therefore protecting the electrical circuit from traveling surges, overload, and short circuits as well as human personnel from earth leakage fault which is fatal.

We are counted among the renowned manufacturer and supplier of comprehensive range of AMF Panel that are known for its excellent fabrication and durability.

AMF board and ATS panels monitor the incoming AC mains supply, activate the standby generator when mains power fails and make an automatic electrical transfer of the building’s load from the mains to the generating set. When the mains supply returns, the ATS panel controls a return to the mains supply and shuts down the generator after a suitable cooling run.

Introduction

Highly used in various industries to control the process with efficiency, these panels have received accolades and admiration across the globe. Being a quality centric organization, our entire range of panels is assembled as per industrial quality regulatory norms and conditions. Customers can avail these products at industry relevant prices.

Features :

• Firstly Safe
• Secondly Durable
• Thirdly High performance
• Also Sturdy construction and
• Finally Corrosion resistance

Standards
All switches and the circuit breakers, connectors should conform to IEC60947, part I, II and III/ IS 60947 part I, II and III by accu panels. Also Electrical standards followed include Indian and international standards like IS 8623, IEC 60529.

Application

Learn how to make Automatic Mains Failure panels and Automatic Transfer Switch panels. The book describes in simple words and drawingS the basic principles to make generator control panels. The guide includes step-by-step examples in a way that you will be able to make panels in the size 15 up to 200kVA. Once you purchase the book, you will receive free updates and additional information to keep you update on the STATE-OF-ART products.

APFC Panel basic
APFC Panel basic is to improve the power factor. Therefore APFC Panel mostly known as Automatic Power Factor Control Panel. In LT side most of loads are inductive because since long time we are using electronic and inductive equipments for appliances. In a result for wastage of energy power bills penalties come from electricity boards. Accu-Panels is famous APFC Panel manufacturer with new design concept.

Types APFC panels
There are two types of APFC panel (APFC & RTPFC Panel) Apfc full form is Automatic power factor improvement Panel and rtpfc panel means real time power factor correction panel. Accu-panels making best design with standard specification as per KVAR rating and best price. Also we are most reliable APFC Panel manufacturer in Ahmedabad India.

Standards of APFC Panel
APFC panel also known as automatic power factor improvement Panel because, it can control the power factor for reactive loads. Similarly they are designed as per IS standard IS 8623, IEC 60529. In addition, accupanels provide high quality and reliability.

Protection Level
Firstly, all indoor panels have protection of IP54 or better even more all outdoor panels will have protection of IP65 or better. Secondly, all APFC Panels are made by laser cutting CRCA sheet. After that  powder coating with 7-Tank process.

Impact of apfc Panel
Main impact of APFC Panel for save 30% energy & provide quality of power to the LT Panels. Panel worked with auto mode by Microprocessor APFC Relay and manual with switch and Push buttons.APFC Relay working Intelligent switching operation, fast response, high break relay Polarity reversal indication.

Applications
RTPFC or APFC mainly used for improvement of PF up to 0.999 or Unity. Everybody knows that how much costly electrical bills. In Conclusion, Accu-Panels suggest and offer best quality power factor control Panels with best calculation support also design of panel and provide control drawing for apfc Panel.

Definition

Auto Change over Panel using by controlling DG START / STOP sequence in accordance to the availability of utility power supply. Also We design & manufacture the AMF panels for various capacity & different make of Diesel EA set. In Conclusion, Being a quality centric organisation, So our entire range of panels is assembled as per industrial quality regulatory norms and conditions.

Standards

All switches and the circuit breakers, connectors should conform to IEC60947, part I, II and III/ IS 60947 part I, II and III by accu panels. Also Electrical standards followed include Indian and international standards like IS 8623, IEC 60529.

Protection Level

Firstly, all indoor panels have protection of IP54 or better even more all outdoor panels have protected with IP65 or better. Secondly, all PCC Panels made by laser cutting CRCA sheet and powder coating with 7-Tank process.

Features :

• Firstly Safe.
• Secondly Durable.
• Thirdly High performance.
• Also Sturdy construction.
• Finally Corrosion resistance.
• Auto/Manual Selector available.
• Auto delay in start of genset.
• Genset stop with delay of 3 minutes.
• Hooter-alarm annunciation for fail to start.
• Checklist to find the fault and to correct.
• 4st switch control for healthy start and stop for genset.
• Manual Start & Stop Switch.
• Emergency Stop switch also available.

Application

A fire control panel is a component that offers control through a fire alarm or notification system. Throughout the building, sensors are installed. These sensors redirect information to this control panel. ... The panel also alerts the employees inside the building if a potential fire was detected or predicted.

MCC panel (motor control centre ) can include variable frequency drives, programmable controllers, and metering and may also be the electrical service entrance for the building We offer a wide range of motor control panels.we are manufacturing Standard MCC panels with remote operation. Draw out/Non Draw out MCC, Dual starter and Star/Delta starter panels.we offer these control panels to the clients in various specifications as per their specific needs.

What is mCC Panel ?
MCC panel  (motor control centre ) is useing for motor control of various electrical power Industry. Therefore, it is most important in electricity. MCC panel is a Electrical control panel in LT panels. In other words, it can control the motor from generation to production. Accu-Panels is leading mcc panel manufacturer in india

Standards of mCC Panel
MCC panel also known as Motor Control Centre Panel because it can control the control power source. Similarly they are designed as per IS standard IS 8623, IEC 60529. In addition, accupanels provide high quality and reliability.

All switches and the circuit breakers, connectors conformed to IEC60947, part I, II and III/ IS 60947 part I, II and III.Electrical standards followed include Indian and international standards like IS 8623, IEC 60529.

Ratings
Accu-Panels manufacturing the MCC Panel with high standard of quality and reliability. As a result, Accupanels is a top 10 electrical panel manufacturer. LT panels is designed with rated current ranging from 100A to 6300A and up to 65KA and 80KA fault level.

Protection Level
Firstly, all indoor panels have protection of IP54 or better even more all outdoor panels will have protection of IP65 or better. Secondly, all MCC Panels are made by laser cutting CRCA sheet and powder coating with 7-Tank process.

What’s New
Additionally, all Our LT panels having undergo pretreatment for Decreasing, Water rinsing & De-rusting/ Phosphating, also all LT panels Painted with Powder Coated or Synthetic enamel as per the requirements. After that,seven tank process made by the painter. Similarly, Bus Bars / Internal Wiring uniform cross section and supported by SMC and DMC bases. Similarly, earthing Bus Bars running all along the Panel. In Conclusion, MCC panel are an important aspect of electrical control panels and LT panels.

Structure
All the Panel’s with metal clad, totally enclosed, rigid, floor mounted, air -insulated, cubical type suitable for operation on three phase / single phase,415 or 230 volts, 50 Hz. The panels will designed for minimum expected ambient temperature of 45 degrees Celsius, 80 percent humidity and dusty weather.

Accu-panels focus the product and services delivery to industries such as solar power plant, Utilities of industries, Manufacturing plants, Mining and ball mills, Food Beverage, Marine, Construction and Other industries that require a reliable partner for cost effective solution for electrical panels.

Introduction

We are manufacturing NVR Panel, Protection against single phasing or reverse phasing or unbalance supply is one of the major problems in electrical systems.

Its particular special feature is it automatically trips incoming power whenever one of three phases fails with special kind of relay in conjunction used with contactor, spd, mcb, A/M selector switch. After operation of relay, relay doesn’t reset to its original position until all the phases becomes healthy.

What is PCC Panel ?
PCC panel is using for distribution and control of various electrical power source in Industry. Therefore, it is most important in electricity. PCC panel is a distribution board in LT panels. In other words, it can distribute the power from the generation to production. Accu-Panels is leading pcc panel manufacturer in india

Standards of PCC Panel
PCC panel also known as Power Control Centre Panel because it can control the control power source. Similarly they are designed as per IS standard IS 8623, IEC 60529. In addition, all switches and the circuit breakers, connectors conformed to IEC 60947, part I, II and III/ IS 60947 part I, II and III.

Ratings
Accu-Panels manufacturing the PCC Panel with high standard of quality and reliability. As a result, Accupanels is a top 10 electrical panel manufacturer. LT panels is designed with rated current ranging from 100A to 6300A and up to 65KA and 80KA fault level.

Protection Level
Firstly, all indoor panels have protection of IP54 or better even more all outdoor panels have protected with IP65 or better. Secondly, all PCC Panels made by laser cutting CRCA sheet and powder coating with 7-Tank process.

What’s New
Additionally, all Our LT panels having undergo pretreatment for Decreasing, Water rinsing & De-rusting/ Phosphating, also all LT panels Painted with Powder Coated or Synthetic enamel as per the requirements. After that,seven tank process made by the painter. Similarly, Bus Bars / Internal Wiring uniform cross section and supported by SMC and DMC bases. Similarly, earthing Bus Bars running all along the Panel. In Conclusion, PCC panel are an important aspect of electrical control panels and LT panels.

Structure
All the Panel’s with metal clad, totally enclosed, rigid, floor mounted, air -insulated, cubical type suitable for operation on three phase / single phase,415 or 230 volts, 50 Hz. Power control center panel have designed for minimum expected ambient temperature of 45 degrees Celsius. Also 80 percent humidity and dusty weather.

Accu-panels focus the product and services delivery to industries such as solar power plant, Utilities of industries, Manufacturing plants, Mining and ball mills, Food Beverage, Marine, Construction and Other industries that require a reliable partner for cost effective solution for electrical panels.

APFC/RTFPC Panel mainly used for the improvement of PF up to 0.999 or Unity. Everybody knows that how much costly electrical bills. The main impact of APFC Panels for save up to 30% energy & provide quality of power to the LT Panels. APFC Panel (एपीएफसी पैनल) manufacturer mostly known as automatic power factor control panel. APFC Panel includes a microcontroller-based programmable controller which switches on or off the capacitor banks of suitable capacity. By reading the reactive load automatically in multiple stages by directly works in the principle of VAR sensing tends to maintain the PF to 0.99 Lag.

What is pdb panel?
Power Distribution Board (PDB pancl) is a component of an electrical system which Distribute electrical power into subsidiary circuit by circuit breaker and switch fuse unit. Power Distribution Board also known as power distribution board panel of electrical panel. In addition, equipped complete with all type of required number of air circuit breakers, switch fuse unit, contactor, protective relays, fuses, motors, indicating lamps, push buttons, busbar etc.

What we are offering?
Additionally, all Power Distribution Board (PDB pond) having undergo pretreatment for Dosing, Water rinsing & De-rusting/ Phosphating, also all LT panels  Pointed with Powder Coat. or Synthetic enamel as per thc rcquircments. After that, seven tank proccss made by the painter, Similarly, Bus Bars / Internal Wiring uniform cross section and supported by SMC and DMC hoses.

Structure
We are making panels With metal clad enclosed and fabricated out of high quality CRCA shoot. We provide busbar According to the air insulated and made high quality, high conductivity, high strength copper/Aluminium with ht shrinkable PVC sleeves and colour coded in red, Yellow, Blue and Black to identify the throe phases and nautral of the system as per relevant IS code. Accu Pancls is providing best quality and customized PDB panels with customized solutions as per client requirement.

Protection Level
Firstly, all indoor panels have protection of IP54 or better even more all outdoor panels have protected with IP65 or better. Secondly. all PCC Panels made by laser cutting CRCA sheet and powder coating with 7-Tank process.

Standards of PDB Panel
PD8 panel are designed as per IS standard IS 8623. IEC 60529.In addition, all switches and the circuit breakers, connectors conformed to IEC 60947, part I, II and III/ IS 60947 part I, II and III.

Specifications
All the Panel's with metal clad, totally enclosed, rigid, floor mounted, air -insulated. cubical type suitable for operation on three phase / single phase,415 or 230 volts, 50 Hz. Power control center panel have designed for minimum expected ambient temperature of 45 degrees Celsius. Also 80 percent humidity and dusty weather.

Applications

• Rcsidential,Commorcial and industrial purposcs.
• Hotels
• Hospitals
• Schools
• Cement lndustries
• Sugar lndustries etc.

Protection Level
Firstly, all indoor panels have protection of IP54 or better even more all outdoor panels have protected with IP65 or better. Secondly, all PCC Panels made by laser cutting CRCA sheet and powder coating with 7-Tank process.

Introduction
We Accu-panels are the premier organization engaged in manufacture and supply of incredible range of Variable Frequency Panels (VFD) and SOFT Starter Panels. These panels, also known as digital VFD drives play an important function in VFD squirrel cage induction and in motor control applications.

Features :

• Firstly Safe
• Secondly Durable
• Thirdly High performance
• Also Sturdy construction and
• Finally Corrosion resistance

Specifications
A soft starter have solid-state device that protects AC electric motors from damage caused by sudden influxes of power by limiting the large initial inrush of current associated with motor startup. They provide a gentle ramp up to full speed and are used only at startup (and stop, if equipped). Ramping up the initial voltage to the motor produces this gradual start. In Conclusion, Soft starters also known as reduced voltage soft starters (RVSS).

Applications

• Soft starters are used in applications where:
• Speed and torque control required only during startup (and stop if equipped with soft stop)
• Reducing large startup inrush currents associated with a large motor
• The mechanical system requires a gentle start to relieve torque spikes and tension associated with normal startup (for example, conveyors, belt-driven systems, gears, and so on)
• Pumps used to eliminate pressure surges caused in piping systems when fluid changes direction rapidly

What is synchronizing panel ?
Synchronizing panel The name itself describes its role when you link with power Source. Means – To compare, match, adjust with two or more power magnitude levels. Demand of synchronising panels comes into action where power continuity is at priority level. In Conclusion, Synchronising panels is the most important part for critical production industries in LT Panels

Origin from the basic
First of all I would like to introduce its back up player called AMF(Auto Mains Faliure) Panel on which the whole scenario depends. At every place where power continuity is primary requirement, you have depend on alternate sources besides mains grid incomer. So you have to rely on captive power plant like Diesel/UPS/Batteries/Wind/Solar etc. no concern whether it is renewable or non-renewable sources of energy.

Principle of operation
All Power sources connected to common busbars using motorised circuit breakers or Air circuit breakers. Whenever main grid supply fails, Synchronizing relay comes into action and give control signal to alternate sources. So DG connected to common busbars. After that initial warmup DG starts and allowed to rotate on full speed.

Protection Level
Firstly, all indoor panels have protection of IP54 or better even more all outdoor panels have protected with IP65 or better. Secondly, all PCC Panels made by laser cutting CRCA sheet and powder coating with 7-Tank process.

Features :

• Advanced as well as reliable control module
• Full range protection function, and alarm shutdown feature
• Synchronizing relays Woodward/Stucke/DEIF/Deepsea.
• Power Generation Continuity
• Protection class of IP52/IP55/IP65.
• Ratings upto 6000A.
• Generator and grid electricity Board feeder for AMF function.
• Both Active and reactive power load sharing and avoids overloading of either system.

Standards of Dg Synchronizing Panel
Synchronization Panel are designed as per IS standard IS 8623, IEC 60529. In addition, all switches and the circuit breakers, connectors conformed to IEC 60947, part I, II and III/ IS 60947 part I, II and III.

What is TVM Panel
TVM Panels is khown as Trivector meter. In other words, measuring instrument which measures the kW, kVAr, the kVA of a power line. These instruments can measure both power as well as energy. Trivector meters are normally used in substations and to measure the power flowing through the feeders

Ratings
Accu-Panels manufacturing the TVM Panels with high standard of quality and reliability. As a result, Accupanels is a top 10 electrical panel manufacturer. LT panels is designed with rated current ranging from 100A to 6300A and up to 65KA and 80KA fault level.

Protection Level
Firstly, all indoor panels have protection of IP54 or better even more all outdoor panels will have protection of IP65 or better. Secondly, all TVM Panels are made by laser cutting CRCA sheet and powder coating with 7-Tank process.

What’s New
Additionally, all Our LT panels having undergo pretreatment for Decreasing, Water rinsing & De-rusting/ Phosphating, also all LT panelsPainted with Powder Coated or Synthetic enamel as per the requirements. After that,seven tank process made by the painter. Similarly, Bus Bars / Internal Wiring uniform cross section and supported by SMC and DMC bases. Similarly, earthing Bus Bars running all along the Panel. In Conclusion, TVM Panels are an important aspect of electrical control panels and LT panels.

Structure
All the Panel’s with metal clad, totally enclosed, rigid, floor mounted, air -insulated, cubical type suitable for operation on three phase / single phase,415 or 230 volts, 50 Hz. The panels will designed for minimum expected ambient temperature of 45 degrees Celsius, 80 percent humidity and dusty weather.

Features :

• Firstly Safe
• Secondly Durable
• Thirdly High performance
• Also Sturdy construction and
• Finally Corrosion resistance

VFD Panel Working
VFD Panel full form is Variable Frequency drive panel also known as VFD Control Panel. Variable Frequency drive panel designed to control the speed of electric motor and feed pump. VFD and soft starter are widely used in drilling, pumping and other large machine applications..

The VFD panels widely used in tube mills, paper mills, extruder plants, rolling Mills, cable industry and CTL Lines. Also VFD panels installed in hospitals, business houses and other public places.

Protection Level
Firstly, all indoor panels have protection of IP54 or better even more all outdoor panels have protected with IP65 or better. Secondly, all PCC Panels made by laser cutting CRCA sheet and powder coating with 7-Tank process.

Introduction
We Accu-panels are the premier organization engaged in manufacture and supply of incredible range of Variable Frequency Panels (VFD) and SOFT Starter Panels. These panels, also known as digital VFD drives play an important function in VFD squirrel cage induction and in motor control applications.

Features

• Firstly Safe
• Secondly Durable
• Thirdly High performance
• Also Sturdy construction and
• Finally Corrosion resistance

Specifications
A soft starter have solid-state device that protects AC electric motors from damage caused by sudden influxes of power by limiting the large initial inrush of current associated with motor startup. They provide a gentle ramp up to full speed and are used only at startup (and stop, if equipped). Ramping up the initial voltage to the motor produces this gradual start. In Conclusion, Soft starters also known as reduced voltage soft starters (RVSS).

Applications

• Soft starters are used in applications where:
• Speed and torque control required only during startup (and stop if equipped with soft stop)
• Reducing large startup inrush currents associated with a large motor
• The mechanical system requires a gentle start to relieve torque spikes and tension associated with normal startup (for example, conveyors, belt-driven systems, gears, and so on)
• Pumps used to eliminate pressure surges caused in piping systems when fluid changes direction rapidly